Dell Inspiron N5010

本文內容或本節內容已經過期。

原因： 請提供模板的第一個位置參數以概括原因。 (在Talk:Dell Inspiron N5010討論)

簡介[編輯 | 編輯原始碼]

本文是寫給使用使用戴爾靈越N5010計算機用戶的Arch Linux配置指南

概要[編輯 | 編輯原始碼]

To do[編輯 | 編輯原始碼]

eSata test
HDMI test
Force acpi/cpufreq to work (somehow :))
Need someone with wikimedia syntax skills to guide me formating this wiki page, please :).

Hardware[編輯 | 編輯原始碼]

Working[編輯 | 編輯原始碼]

Ethernet[編輯 | 編輯原始碼]

Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) Works out of the box.

DVDRW[編輯 | 編輯原始碼]

ATAPI: TSSTcorp DVD+/-RW TS-L633J, D200, max UDMA/100

CD-ROM TSSTcorp DVD+-RW TS-L633J D200 PQ: 0 ANSI: 5

Using driver: scsi3-mmc

Supported extensions:

24x/24x writer dvd-ram cd/rw xa/form2 cdda tray

Successfully burns both cd mediums and dvd mediums, tested using K3B 2.0.2-1.

觸摸板[編輯 | 編輯原始碼]

如果使用Gnome桌面環境那麼可以直接使用快捷鍵來控制觸摸板的鎖定與開啟

未安裝Gnome桌面環境的用戶控制觸摸板需要使用synaptic驅動。

需要安裝軟件包xf86-input-synaptics.

詳細信息可以查看Touchpad Synaptics (簡體中文)

Todo: Needs tweaking, cause it is too anoying.

Use this script to disable the touch pad when you do not like it:

#!/bin/bash

if [ $(synclient -l | grep TouchpadOff | gawk -F '= ' '{ print $2 }') -eq 0 ]; then
    synclient TouchpadOff=1
else
    synclient TouchpadOff=0
fi

Wireless[編輯 | 編輯原始碼]

Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) In kernel 2.6 it works out of the box, but in kernel 3.0 there is no wlan0, we have to blacklist some modules.

So open "/etc/modprobe.d/modprobe.conf" and append the following line:

blacklist bcma

now, reboot or restart the kernel.

When we issue iwconfig, it should now list wlan0:

lo        no wireless extensions.

eth0      no wireless extensions.

wlan0     IEEE 802.11bgn  ESSID:"*******"  
          Mode:Managed  Frequency:2.427 GHz  Access Point: XX:XX:XX:XX:XX:XX   
          Bit Rate=72.2 Mb/s   Tx-Power=19 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=70/70  Signal level=-32 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:968   Missed beacon:0

Bluetooth[編輯 | 編輯原始碼]

詳情查看Bluetooth (簡體中文)

Both pairing, sending files and receiving files works out of the box, tested with blueman.

VGA[編輯 | 編輯原始碼]

Tested on an external CRT monitor, works out of the box on KDE 4.7.

Graphic adapter[編輯 | 編輯原始碼]

ATI Mobility Radeon HD 5600 working out of the box.

Audio[編輯 | 編輯原始碼]

Intel Corporation 5 Series/3400 Series Chipset High Definition Audio

Display[編輯 | 編輯原始碼]

Available sizes:

1366x768       60.0*+
1280x720       59.9  
1152x768       59.8  
1024x768       59.9  
800x600        59.9  
848x480        59.7  
720x480        59.7  
640x480        59.4

Brightness controls work out of the box.

Suspending to disk (Hibernation)[編輯 | 編輯原始碼]

works out of the box - tested on KDE 4.7

Suspending to ram (Sleep)[編輯 | 編輯原始碼]

works out of the box - tested on KDE 4.7

Sensors[編輯 | 編輯原始碼]

使用lm_sensors軟件可以監控計算機各設備的溫度，詳情查看Lm_sensors (簡體中文) 目前只能監測到三個設備的溫度:

radeon-pci-0100（顯卡）
acpitz-virtual-0
acpi termal zone 0 Temperature

They work out of the box. 如果想監測硬盤溫度可以使用[[hddtemp

Partially Working[編輯 | 編輯原始碼]

Not Working[編輯 | 編輯原始碼]

Processor frequency control[編輯 | 編輯原始碼]

says unsupported I think:

:: Setting cpufreq governing rules                                                                                     [BUSY]
grep: /sys/devices/system/cpu/cpu* /cpufreq/scaling_available_governors: No such file or directory, cpu 0 wrong, unknown or unhandled CPU?
Error setting new values. Common errors:
- Do you have proper administration rights? (super-user?)
- Is the governor you requested available and modprobed?
- Trying to set an invalid policy?
- Trying to set a specific frequency, but userspace governor is not available,
  for example because of hardware which cannot be set to a specific frequency
  or because the userspace governor is not loaded?
                                          1wrong, unknown or unhandled CPU?
Error setting new values. Common errors:
- Do you have proper administration rights? (super-user?)
- Is the governor you requested available and modprobed?
- Trying to set an invalid policy?
- Trying to set a specific frequency, but userspace governor is not available,
   for example because of hardware which cannot be set to a specific frequency
   or because the userspace governor is not loaded?
                                            2wrong, unknown or unhandled CPU?
Error setting new values. Common errors:
- Do you have proper administration rights? (super-user?)
- Is the governor you requested available and modprobed?
- Trying to set an invalid policy?
- Trying to set a specific frequency, but userspace governor is not available,
   for example because of hardware which cannot be set to a specific frequency
   or because the userspace governor is not loaded?
                                              3wrong, unknown or unhandled CPU?
Error setting new values. Common errors:
- Do you have proper administration rights? (super-user?)
- Is the governor you requested available and modprobed?
- Trying to set an invalid policy?
- Trying to set a specific frequency, but userspace governor is not available,
   for example because of hardware which cannot be set to a specific frequency
   or because the userspace governor is not loaded?
                                                                                                                      [DONE]