小米筆記本 Air 13.3 (2016)
設備 | 狀態 | 內核模塊 |
視頻 | 工作 | i915 |
無線網絡 | 工作 | iwlwifi |
藍牙 | 工作 | btusb |
音頻 | 工作 | snd_hda_intel |
觸摸板 | 工作 | ? |
網絡攝像頭 | 工作 | uvcvideo |
USB-C / Thunderbolt 3 | 工作 | ? |
功能/多媒體鍵 | 工作 | ? |
小米筆記本 Air 13.3 是一款鋁合金的超極本,由小米公司生產。目前只能在中國或者通過跨境電商網站購買。第一代小米 Air 使用運行在 2.3 Ghz 的 Intel Core i5 6200U 和 NVIDIA GeForce 940MX 顯卡,以較低的價格提供了不錯的性能。
如果按照以下步驟安裝,應該不會出現任何問題。
安裝前的系統設置[編輯 | 編輯原始碼]
正確啟動 Arch 安裝媒介實際上很簡單。啟動 Arch 安裝 ISO 之前,在引導過程中按 F2
,進入 UEFI 設置。
- 安全 -> 設置密碼
- 安全 -> 關閉安全啟動(Secure Boot)
- 再次設置密碼,但在"新密碼"一欄留空,從而重置密碼
Arch的安裝就可以正常進行了。請參考安裝指南獲取更多信息。
nvme0n1
而非 sda
。顯卡設置[編輯 | 編輯原始碼]
小米筆記本同時配有 Intel 的集成顯卡和 Nvidia 的獨立顯卡。
只使用集顯[編輯 | 編輯原始碼]
如果你想完全禁用Nvidia GPU以提高續航,操作如下:
- 安裝 xf86-video-intel包
- 屏蔽內核模塊 nvidia包 和 xf86-video-nouveau包,參見 Kernel module#黑名單
/etc/modprobe.d/nouveau.conf
blacklist nouveau blacklist nvidia
/etc/modprobe.d/bbswitch
options bbswitch load_state=0 unload_state=0
Intel/Nvidia 混合配置[編輯 | 編輯原始碼]
使用 Bumblebee 或 NVIDIA Optimus 都可以啟用混合 GPU。Bumblebee 一般續航和兼容性更好,但沒有 NVIDIA 的官方支持。
請參閱相應文章。
輸入[編輯 | 編輯原始碼]
觸摸板[編輯 | 編輯原始碼]
想要正常使用觸摸板,必須使用 xf86-input-libinput包。如果使用 xf86-input-evdev包,則觸摸板會像觸摸屏一樣工作(也就是說,它直接把你在觸摸板上的操作映射到屏幕上)。而如果使用 xf86-input-synaptics包(儘管強烈不建議這樣,因為它已經被廢棄了(參見 Synaptics)),觸摸板只會偶爾正常工作。通過XOrg配置文件對 libinput包 作如下配置,即可啟用雙指手勢、輕觸點擊、雙指/三指點擊(分別對應於按下鼠標右鍵和中鍵)。
/etc/X11/xorg.conf.d/20-touchpad.conf
Section "InputClass" Identifier "libinput touchpad" Driver "libinput" MatchIsTouchpad "on" MatchDevicePath "/dev/input/event*" Option "Tapping" "on" Option "ClickMethod" "clickfinger" Option "NaturalScrolling" "true" EndSection
Fn 鍵[編輯 | 編輯原始碼]
在該筆記本上默認Fn鍵是啟用的(如按F1可以靜音)。如果按這些Fn功能鍵沒有反應,那麼你很可能使用的是窗口管理器而不是桌面環境。使用相應的配置文件將按鍵與功能綁定,比如利用 Xbindkeys 或 i3 的 bindsym
。
大多數 Fn 鍵返回正確的鍵碼。以下表格包含了這些信息:
Fn-F-Key | Keycode |
---|---|
F1
|
XF86AudioMute
|
F2
|
XF86AudioLowerVolume
|
F3
|
XF86AudioRaiseVolume
|
F4
|
XF86MonBrightnessDown
|
F5
|
XF86MonBrightnessUp
|
F6
|
Super_L + P
|
F7
|
無
|
F8
|
Super_L + Tab
|
F9
|
無
|
F10
|
Turns Keyboard backlight on/off
|
F11
|
Print
|
F12
|
Insert
|
顯示校準[編輯 | 編輯原始碼]
出廠顯示校準很差。作為對校色儀的替代,試試這裏的ICC 配置文件:tlvince/xiaomi-mi-notebook-air-13.
硬件信息[編輯 | 編輯原始碼]
lspci 輸出:
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers (rev 08) 00:02.0 VGA compatible controller: Intel Corporation HD Graphics 520 (rev 07) 00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21) 00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21) 00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21) 00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #1 (rev f1) 00:1c.4 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 (rev f1) 00:1d.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 (rev f1) 00:1f.0 ISA bridge: Intel Corporation Sunrise Point-LP LPC Controller (rev 21) 00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21) 00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21) 00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21) 01:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 940MX] (rev ff) 02:00.0 Network controller: Intel Corporation Wireless 8260 (rev 3a) 03:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM951/PM951 (rev 01)
lsusb 輸出:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 8087:0a2b Intel Corp. Bus 001 Device 002: ID 05c8:03a2 Cheng Uei Precision Industry Co., Ltd (Foxlink) Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
故障排除[編輯 | 編輯原始碼]
背光燈[編輯 | 編輯原始碼]
以默認配置使用 xorg-xbacklight包 之類的工具是無效的,因為背光燈路徑不符合標準。為了解決此問題,需要使用 X-Org 配置文件:
/etc/X11/xorg.conf.d/10-backlight.conf
Section "Device" Identifier "Card0" Driver "intel" Option "Backlight" "intel_backlight" BusID "PCI:0:2:0" EndSection
WiFi[編輯 | 編輯原始碼]
如果自動檢測的 WiFi 驅動出現問題,可能是因為兩個驅動存在衝突,如 rfkill list
的輸出所示。屏蔽有問題的驅動以解決此問題:
/etc/modprobe.d/blacklist.conf
blacklist acer-wmi
註:此問題在 Linux 內核 4.9 以上版本中已經解決。
音頻插孔[編輯 | 編輯原始碼]
如果想使用插入音頻組合插孔中的耳機上的麥克風,請將這一行加入 alsa 配置文件:
/etc/modprobe.d/alsa-base.conf
options snd-hda-intel model=dell-headset-multi
然後重啟機器。