VMware/安裝 Arch Linux 為虛擬機
這篇文章是關於如何在 VMware 產品,比如 Workstation Player,Fusion 或 Workstation Pro 中安裝Arch Linux。
編譯進內核的驅動程序(模塊)[編輯 | 編輯原始碼]
lsmod | grep modulename
進行確認),可以將其添加到 mkinitcpio 的 MODULES
列表。例如:
/etc/mkinitcpio.conf
... MODULES=(... vmw_balloon vmw_pvscsi vsock vmw_vsock_vmci_transport ...)
確保 重新生成 initramfs。
vmw_balloon
- 物理內存管理驅動。它可以像一個氣球一樣被「吹大」,在客户機上申請內存,並通過監視器釋放掉這部分內存,使得這部分物理內存可以被分配給其它客户機使用;也可以"放氣",以允許虛擬機使用更多物理內存。還支持將反分配狀態(deallocated)的虛擬機原本所佔的內存釋放回主機,而無需徹底停用虛擬機。vmw_pvscsi
- VMware 平行虛擬化 SCSI(PVSCSI)的主機總線適配器(HBA)。vmw_vmci
- 虛擬機通信接口(VMCI)。VMCI 虛擬設備的作用是實現虛擬環境中的主機-客機間高速通信。vmwgfx
- 這是 VMware SVGA2 虛擬顯卡的 DRM 驅動,作用是 3D 加速。支持 KMS。vmxnet3
- VMware 的 vmxnet3 虛擬網卡所需模塊。- open-vm-tools包 10.0 以上版本包含了一個基於 FUSE 實現的 HGFS 文件系統,支持 Linux 4.0 及以上版本內核,用於主機-客機間共享目錄。
如果你在某種監視器(比如 VMware vSphere Hypervisor)上運行 Arch Linux,那麼同時需要安裝下面這些模塊。當虛擬機間通信時,客户機-伺服器類型的應用可以通過 VMCI 虛擬設備向 VMCI 套接字(vsock)接口進行寫入:
vsock
- 虛擬套接字協議。其作用是允許虛擬機,主機或監視器間像 TCP/IP 協議一樣通信。vmw_vsock_vmci_transport
- 基於 VMCI 實現的虛擬套接字。
某些模塊,例如舊的 vmhgfs
目錄共享模塊,還需要額外地手工編譯,並手工從 systemd 啟用服務,才能正常運轉。
VMware Tools 與 Open-VM-Tools 方案對比[編輯 | 編輯原始碼]
2007 年,VMware 將 VMware Tools 中的大部分代碼以 LGPL 協議發佈,這就是 Open-VM-Tools。官方的 VMware Tools 不再單獨向 Arch Linux 提供。
以往,VMware Tools 方案所提供的網絡與儲存驅動是最好的,而且還帶有時間同步等功能。然而網絡與 SCSI 驅動這部分代碼現已合併入 Linux 內核了。
VMware Tools 曾經有使用 Unity mode 功能的優勢,但由於使用的人不多且維護困難,於是從 VMWare Workstation 12 開始移除了 Linux 客户機的 Unity mode 支持。詳情請閱 此跟帖 的答案。
Open-VM-Tools[編輯 | 編輯原始碼]
實用工具[編輯 | 編輯原始碼]
open-vm-tools包 軟件包裡包括如下工具:
vmtoolsd
- 負責匯報虛擬機狀態的服務。vmware-checkvm
- 用於檢測虛擬機中是否在運行着某程序的工具。vmware-toolbox-cmd
- 用於收集宿主系統信息的工具。vmware-user
- 用來在宿主機和虛擬機之間共享剪切板(複製/粘貼)的工具。vmware-vmblock-fuse
- 文件系統工具。基於 FUSE(Filesystem in Userspace)實現了宿主/客機之間拖拽文件的功能。vmware-xferlogs
- 向虛擬機的日誌文件輸出日誌與調試信息。vmhgfs-fuse
- 掛載 HGFS 共享目錄的工具。
安裝[編輯 | 編輯原始碼]
安裝 open-vm-tools包。然後 啟動 並 啟用 vmtoolsd.service
和 vmware-vmblock-fuse.service
。
如果主機和客户機間複製粘貼功能無法正常工作,請嘗試手動安裝 gtkmm3包。
官方的 VMware Tools[編輯 | 編輯原始碼]
模塊[編輯 | 編輯原始碼]
vmblock
- 文件系統驅動。支持在主機-客機間拖拽文件。已被vmware-vmblock-fuse
取代。vmci
- 主機-客户機間的高性能通信接口。vmmon
- 虛擬機監視器。vmnet
- 網絡驅動。vsock
- VMCI 套接字。
vmware-vmblock-fuse
這一組件不是以 內核 模塊的形式實現的;且除非你禁用了 fuse
,vmblock
已被從內核中移除。如果需要啟用這些功能,需要手動啟用 systemd 服務,具體操作見下文。
在客户機安裝[編輯 | 編輯原始碼]
安裝依賴項:base-devel包組(用於編譯模塊),net-tools包(提供 ifconfig
供安裝程序調用)和 linux-headers包 (提供內核頭文件)。另外需要 devtools包 包中的 pkgctl
來簽出 open-vm-tools
。
然後為安裝程序創建假 init 目錄:
# for x in {0..6}; do mkdir -p /etc/init.d/rc${x}.d; done
掛載安裝程序:
# mount /dev/cdrom /mnt
解壓(以解壓到 /root
為例):
# tar xf /mnt/VMwareTools*.tar.gz -C /root
開始安裝:
# perl /root/vmware-tools-distrib/vmware-install.pl
若安裝時出現如下的錯誤,都可以安全忽略:
- VMXNET 3 虛擬網卡
- "Warning: This script could not find mkinitrd or update-initramfs and cannot remake the initrd file!"
- 在系統中找不到 Fuse 組件
啟用 vmware-vmblock-fuse
systemd 服務(請確保你手動安裝了依賴或使用了 -s
參數)。The open-vm-tools
source code should be checked out using the Arch build system.
$ pkgctl repo clone open-vm-tools $ cd open-vm-tools $ makepkg -s --asdeps # cp vm* /usr/lib/systemd/system
啟用 vmware-vmblock-fuse.service
和 vmtoolsd.service
。
接下來重新啟動虛擬機。
登錄並啟動 VMware Tools:
# /etc/init.d/rc6.d/K99vmware-tools start
另外,可以通過創建 /etc/systemd/system/vmwaretools.service
文件來在啟動時自動啟動 vmware-tools
:
/etc/systemd/system/vmwaretools.service
[Unit] Description=VMWare Tools daemon [Service] ExecStart=/etc/init.d/vmware-tools start ExecStop=/etc/init.d/vmware-tools stop PIDFile=/var/lock/subsys/vmware TimeoutSec=0 RemainAfterExit=yes [Install] WantedBy=multi-user.target
然後啟用 vmwaretools.service
。
Xorg 配置[編輯 | 編輯原始碼]
需要安裝以下依賴:xf86-input-vmmouse包,xf86-video-vmware包,以及 mesa包。
應該只需要這幾個包就可以啟動至 graphical target
了。接下來 /etc/xdg/autostart/vmware-user.desktop
會自動啟動,並負責完成在虛擬機裡運行的相關必要配置。
然而如果你先啟動至了 multi-user.target
,或者你的環境不太常規(比如用了多個顯示器),那麼你需要手動啟用 vmtoolsd.service
服務,並且還需要讓 Xorg 以根權限運行以加載相關驅動。
提示與技巧[編輯 | 編輯原始碼]
通過 vmhgfs-fuse
共享目錄[編輯 | 編輯原始碼]
open-vm-tools
v.10.x 與 Linux 內核 4.x,同時需要 VMware Workstation / Fusion。在菜單中選擇 Edit virtual machine settings > Options > Shared Folders > Always enabled,即可建立共享目錄。
在客機裡運行如下命令可以列出共享目錄:
$ vmware-hgfsclient
然後以如下方式掛載:
# mkdir <shared folders root directory> # vmhgfs-fuse -o allow_other -o auto_unmount .host:/<shared_folder> <shared folders root directory>
如果碰到了如下報錯:fusermount: option allow_other only allowed if 'user_allow_other' is set in /etc/fuse.conf
,需將 /etc/fuse.conf
中的這一行取消註釋:
user_allow_other
欲了解 vmhgfs-fuse
的其他掛載參數,可以用 -h
參數調用:
# vmhgfs-fuse -h
cp
, mv
or cat
) result in an "Input/output error" when accessing the shared folder then setting the mount option max_write
can serve as a workaround (observed with open-vm-tools
version 11.1.0 and higher; see this bug report: https://github.com/vmware/open-vm-tools/issues/437)).fstab[編輯 | 編輯原始碼]
每個共享目錄的掛載都需要寫如下的一行配置:
/etc/fstab
.host:/<shared_folder> <shared folders root directory> fuse.vmhgfs-fuse nofail,allow_other 0 0
然後創建並掛載目錄:
# mkdir <shared folders root directory> # mount <shared folders root directory>
Systemd[編輯 | 編輯原始碼]
創建如下 .service
文件:
/etc/systemd/system/<shared folders root directory>-<shared_folder>.service
[Unit] Description=Load VMware shared folders Requires=vmware-vmblock-fuse.service After=vmware-vmblock-fuse.service ConditionPathExists=.host:/<shared_folder> ConditionVirtualization=vmware [Service] Type=oneshot RemainAfterExit=yes ExecStart=/usr/bin/vmhgfs-fuse -o allow_other -o auto_unmount .host:/<shared_folder> <shared folders root directory> [Install] WantedBy=multi-user.target
如果客機裡的 <shared folders root directory>
目錄還不存在,你需要手動提前創建:
# mkdir -p <shared folders root directory>
然後啟用 <shared folders root directory>-<shared_folder>.service
掛載目標。
刪掉 <shared_folder> 的部分可以一次性掛載所有共享目錄。
使用 vmhgfs 模塊的舊式目錄共享[編輯 | 編輯原始碼]
在菜單中選擇 Edit virtual machine settings > Options > Shared Folders > Always enabled,即可建立共享目錄。
確保已加載 vmhgfs
驅動:
# modprobe vmhgfs
可以通過以下命令查看共享目錄清單:
$ vmware-hgfsclient
然後可以通過如下命令掛載目錄:
# mkdir /home/user1/shares # mount -n -t vmhgfs .host:/<shared_folder> /home/user1/shares
在啟動時啟用[編輯 | 編輯原始碼]
按照如下編輯 mkinitcpio.conf
文件:
/etc/mkinitcpio.conf
... MODULES=(... vmhgfs) ...
fstab[編輯 | 編輯原始碼]
每個共享目錄的掛載都需要寫如下的一行配置:
/etc/fstab
.host:/<shared_folder> /home/user1/shares vmhgfs defaults 0 0
然後創建並掛載目錄:
# mkdir /home/user1/shares # mount /home/user1/shares
Systemd[編輯 | 編輯原始碼]
共享目錄需用到 vmhgfs
驅動。參考如下案例創建 .service
文件:
/etc/systemd/system/<shared folders root directory>-<shared_folder>.mount
[Unit] Description=Load VMware shared folders ConditionPathExists=.host:/<shared_folder> ConditionVirtualization=vmware [Mount] What=.host:/<shared_folder> Where=<shared folders root directory>/<shared_folder> Type=vmhgfs Options=defaults,noatime [Install] WantedBy=multi-user.target
/etc/systemd/system/<shared folders root directory>-<shared_folder>.automount
[Unit] Description=Load VMware shared folders ConditionPathExists=.host:/<shared_folder> ConditionVirtualization=vmware [Automount] Where=<shared folders root directory>/<shared_folder> [Install] WantedBy=multi-user.target
如果客户機內還沒有 <shared folders root directory>
目錄,你需要手動提前創建:
# mkdir -p <shared folders root directory>
然後啟用 mnt-hgfs.automount
掛載目標。
刪掉 <shared_folder> 的部分可以一次性掛載所有共享目錄。
Prune mlocate DB[編輯 | 編輯原始碼]
When using mlocate, it is pointless to index the shared directories in the locate DB
. Therefore, add the directories to PRUNEPATHS
in /etc/updatedb
.
3D 加速[編輯 | 編輯原始碼]
如果在創建客户機時沒有選擇 3D 加速功能,可以勾選: 編輯虛擬機設置 > 硬件 > 顯示器 > 加速 3D 圖形。
OpenGL 與 GLSL 支持[編輯 | 編輯原始碼]
用户可以自行更新實現 OpenGL 的 GLSL 內核模塊,覆蓋 Arch 自帶的版本。
本文成文時,OpenGL 3.3 和 GLSL 3.30 都得到了支持。參閱 https://bbs.archlinux.org/viewtopic.php?id=202713 可以了解更多細節。
時間同步[編輯 | 編輯原始碼]
為虛擬機配置時間同步很重要,因為虛擬機比物理機更容易出現時間波動現象。主要原因就在於 CPU 是被共用的。
有兩種方案可以實現同步:與宿主機同步,或是通過外部伺服器同步。
與宿主機同步時間[編輯 | 編輯原始碼]
先確保 vmtoolsd.service
服務已啟動,然後用如下命令啟用時間同步功能:
# vmware-toolbox-cmd timesync enable
宿主系統休眠後,用如下的命令來使客機間同步時間:
# hwclock --hctosys --localtime
與外部伺服器同步時間[編輯 | 編輯原始碼]
參閱 NTP。
故障排除[編輯 | 編輯原始碼]
客户機網絡速度減慢[編輯 | 編輯原始碼]
Arch Linux 和其它 Linux 客户機一樣,當使用 NAT 模式的時候也許會碰到網絡速度減慢的問題。為了解決這個問題,請在宿主機下把對應的客户機的網絡模式切換為 橋接模式,在必要時修改客户機網絡的配置文件。有關配置的詳細信息請參閱 網絡配置 。如果在 Windows 宿主機下,使用正確的客户機網絡配置仍然無法正確連接網絡, 可使用 管理員 運行 虛擬網絡編輯器 並點擊左下方的 還原默認設置 按鈕。
聲音問題[編輯 | 編輯原始碼]
如果虛擬機發出了惱人的巨響,那有可能是 PC 揚聲器的原因。在客户機系統裏禁用 PC 揚聲器即可解決:
鼠標問題[編輯 | 編輯原始碼]
虛擬機可能會出現下列鼠標問題:
- 自動獲取/失去焦點的功能可能會在鼠標箭頭移入窗口時失效
- 按鍵無響應
- 卡頓、延遲
- 在個別軟件中點擊無響應
- 箭頭在移入/移出虛擬機時跳躍
- 箭頭會跳躍到從虛擬機移出的位置
可以先嘗試卸載 xf86-input-vmmouse包 包,xf86-input-vmmouse包 和 xf86-input-libinput包 應足以處理鼠標和鍵盤輸入。
為解決鼠標箭頭跳躍到從虛擬機移出的位置的問題,可以試試在 .vmx
配置文件裡添加如下配置:
~/vmware/<Virtual Machine name>/<Virtual Machine name>.vmx
mouse.vusb.enable = "TRUE" mouse.vusb.useBasicMouse = "FALSE"
VMware 還會為遊戲做自動的鼠標優化。如果這一優化產生了問題,可以在這裏將其禁用:Edit > Preferences > Input > Optimize mouse for games: Never
再者,嘗試在 60-libinput.conf
裡禁用 catchall
事件也可能有用:
/usr/share/X11/xorg.conf.d/60-libinput.conf
#Section "InputClass" # Identifier "libinput pointer catchall" # MatchIsPointer "on" # MatchDevicePath "/dev/input/event*" # Driver "libinput" #EndSection
啟動故障[編輯 | 編輯原始碼]
啟動速度慢[編輯 | 編輯原始碼]
如果 VMware 開啟了內存熱擴容功能,那麼有可能會出現如下錯誤:
- add_memory failed
- acpi_memory_enable_device() error
可以在 .vmx
配置文件裡寫入 mem.hotadd = "FALSE"
來禁用內存熱擴容功能。
~/vmware/<Virtual Machine name>/<Virtual Machine name>.vmx
mem.hotadd = "FALSE"
關機/重啟時卡住不動[編輯 | 編輯原始碼]
試着降低 vmtoolsd 服務的超時閾值(默認是 90 秒):
/etc/systemd/system/vmtoolsd.service.d/timeout.conf
[Service] TimeoutStopSec=1
窗口解像度自動適配[編輯 | 編輯原始碼]
自動適配的意思是,當你在宿主機裡縮放 VMware 窗口之後,Arch 作為客户機系統,應該自動根據主系統窗口的新尺寸來調整解像度。
方案 1[編輯 | 編輯原始碼]
確保在設置裡開啟了自動適配。
VMware Worksation 的這一設置位於:View -> Autosize -> Autofit Guest
方案 2[編輯 | 編輯原始碼]
出於某些原因,解像度自動適配的功能依賴於 gtkmm包 和 gtk2包 軟件包,所以需確保客户機上已安裝這兩個包。如果客户機沒有安裝 X windows 或使用的桌面環境不依賴於 GTK(例如 KDE),那麼你需要手動安裝這兩個包。
方案 3[編輯 | 編輯原始碼]
可能需要向 mkinitcpio.conf 添加相關模塊:
/etc/mkinitcpio.conf
MODULES=(vsock vmw_vsock_vmci_transport vmw_balloon vmw_vmci vmwgfx)
不要忘了重新生成 initramfs。
方案 4[編輯 | 編輯原始碼]
啟用 vmtoolsd.service
。
如果不起效,需確保 vmtoolsd.service
已正常重啟。
方案 5[編輯 | 編輯原始碼]
If GNOME is running on Wayland, install xf86-video-vmware包 (FS#57473).
See [2].
方案 6[編輯 | 編輯原始碼]
Make sure that Stretch Mode is disabled. Follow VM > Settings > Display > Display Scaling and untick the option Stretch mode.
拖拽與複製粘貼[編輯 | 編輯原始碼]
為了確保拖拽與複製粘貼功能正常工作,需要安裝 open-vm-tools包 和 gtkmm3包 這兩個包。
使 vmware-user
在 X11 之後運行:
- 確保
/etc/xdg/autostart/vmware-user.desktop
存在,如果文件不存在,請運行:
# cp /etc/vmware-tools/vmware-user.desktop /etc/xdg/autostart/vmware-user.desktop
或
- 添加
vmware-user
到 Xinitrc
Wayland 暫不支持複製粘貼功能,但使用 Xwayland 的應用可以正常使用該功能。
在 VMware Workstation 11 版上運行共享 VM[編輯 | 編輯原始碼]
Workstation 11 有個 bug:當 Arch 客户機以共享 VM 模式運行,且啟動了 vmtoolsd 服務時,vmware-hostd 會崩潰。open-vm-tools 有個補丁來繞過這一問題。
Virtual Network Editor Wayland[編輯 | 編輯原始碼]
Running GUI applications as root -- some of the following is copied from
- When running VMWare workstation on a wayland host the Virtual Network Editor will not launch under Wayland this because
Trying to run a graphical application as root via su, sudo or pkexec in a Wayland session (e.g. GParted or Gedit), will fail with an error similar to this:
$ sudo vmware-netcfg No protocol specified Unable to init server: Could not connect: Connection refused (gedit:2349): Gtk-WARNING **: cannot open display: :0
This is a security feature of Wayland they reason GUI applications should not be run as root. This can be achieved using the following in the terminal
Using xhost[編輯 | 編輯原始碼]
A more versatile —though much less secure— workaround is to use xhost to temporarily allow the root user to access the local user's X session[3]. To do so, execute the following command as the current (unprivileged) user:
$ xhost si:localuser:root
To remove this access after the application has been closed:
$ xhost -si:localuser:root
Using sudo -E[編輯 | 編輯原始碼]
Launch vmware-netcfg with:
$ sudo -E vmware-netcfg